ICE200 Features

• Supported Devices
  ATtiny12
  AT90S2313
  AT90S2333/4433
  AT90S4414/8515
  AT90S4434/8535
  ATtiny10/11(using ATtiny12 adapter)
  AT90S1200 (using AT90S2313 adapter)
• Utilizes the AT90EM04 Emulator Chip.
• Supports 8 MHz (+4.0V to +6.0V) AT90EM04
• Wide Target Voltage Range (+2.7V to +6.0V)
• Emulator Chip Close to Target Ensures Good AC Characteristics.
• Non-Intrusive
• Target Voltage Sensing Ensures Secure Operation.
• Personality Adapter for Each of the Supported Processors.
• MCU Upgrade can be done from Hostn 32-bits Cycle Counter
• I/O Continues to Operate in Stopped State (After a Break or Breakpoint )
• Single Stepping or Continuous Timer Operation while Single Stepping Code

Utilizes the AVR Studio Debugging Environment that adds:

• Full Run Time Control: run, break, trace into, step over, step out, run-to-cursor, autostep and multistep
• Unlimited Number Of Breakpoints
• Symbolic Debugging Support
• Full Visibility of and Access to register File, SP, PC and Memories
• Access to all I/O Registers ( see the See “Special Considerations” on page21.)
• Auto Log Points (Non Real Time Logging/Watches)

• ICE200 Emulator User's Guide