AT90ADCPOD step by step configuration

AT90S2333 or AT90S4433 running on external clock

• Connect your target application to the pod card using the 28 lead
  probe cable inserted in connector marked 4433 2333.
• Use the 2 wire cable to connect J309 and J103.
  Connect the pins labeled with * with each other.
• Leave jumpers J305-308 unconnected.
• Use the 10 lead cable in connectors marked ADC and ADC28.
• Jumper marked RST must be in position ON.
• Jumper marked S0 must be open and jumper marked S1 must be shorted.
• Jumper J104 and connector ADC40 are insignificant.
• Jumpers marked PB3 and PB4 are insignificant.

Your pod card is now properly configured.