AT90ADCPOD step by step configuration
Device specific settings
AT90S4414 or AT90S8515 running on external clock
- Connect your target application to the pod card using the 40 lead
probe cable inserted in connector marked 4414 8515.
- Use the 2 wire cable to connect J306 and J103.
Connect the pins labeled with * with each other.
- Leave jumpers J305, J307, J308 and 309 unconnected.
- Jumper J104 and connectors marked ADC, ADC28 and ADC40 are insignificant.
- Jumpers marked PB3 and PB4 are insignificant.
- Jumper marked RST must be in position ON.
Your pod card is now properly configured.