AT90ADCPOD step by step configuration
Device specific settings
AT90S2323 running on internal clock or crystal on pod
- Connect your target application to the pod card using the 20 lead
probe cable inserted in connector marked 2323 2343.
- Jumper marked PB3 and PB4 must both be in position OFF.
- Jumper marked RST must be in position ON.
- Jumper J104 and connectors marked ADC, ADC28 and ADC40 are insignificant.
- Jumpers marked S0 and S1 are insignificant.
Your pod card is now properly configured.