AT90ADCPOD step by step configuration
Device specific setting
AT90S4434 or AT90S8535 running on internal clock
- Connect your target application to the pod card using the 8 lead
probe cable inserted in connector marked 2323 2343.
- Use the 10 lead cable in connectors marked ADC and ADC40.
- Jumper marked S0 must be shorted and jumper marked S1 must be open.
- Jumper marked RST must be in position ON.
- Jumpers marked PB3 and PB4 are insignificant.
What is the source of the Real Time Clock?