AT90ADCPOD step by step configuration
Device specific settings
ATtiny11 or ATtiny12 running on external clock
- Connect your target application to the pod card using the 8 lead
probe cable inserted in connector marked 2323 2343.
- Use the 2 wire cable to connect J307 and J103.
Connect the pins labeled with * to each other.
- Leave jumpers J305, J306, J308 and 309 unconnected.
- Jumper J104 and connectors marked ADC, ADC28 and ADC40 are insignificant.
How do you intend to use pin 1?