How to configure your AT90ICEPRO

Configuration of your AT90ICEPRO is necessary if you want to upgrade your emulator to the latest version or you want to reconfigure to other devices than currently supported in your emulator.

  1. Connect your emulator to your PC
  2. Turn on power on your emulator and wait for the green light
  3. Start AVR Studio
  4. Select Tools -> AVR Emulator Configuration System
  5. Choose a device you want your emulator to be configured with. Doubleclick or click add.
  6. Repeat until you are satisfied. Note that there are only room for 6 configurations inside your emulator.
  7. If you change your mind you can remove selected devices by highlighting them and clicking on Remove.
  8. Your window should look like this when you are finished selecting devices:
  9. Click the button download and wait until you get this message:
  10. Turn off the emulator, click OK and turn your emulator back on. The configuration is now complete and you can start your emulation session.

Run this program again if you want to reconfigure your emulator to support other AVR devices.