BSEL2 Jumper

The BSEL2 jumper connects the Byte Select 2 signal for High-Voltage programming of ATmega32, ATmega161 and ATmega163. The BSEL2 jumper should only be mounted when High-Voltage programming ATmega32, ATmega161 or ATmega163. For descrip-tions of the Byte Select 2 signal, see the programming section of the ATmega161 and ATmega163 datasheet.

See Also

• STK500 Starter Kit User's Guide
• Description of User_LEDs
• Description of User Switches
• Connection of LEDs and Switches
• Port Connectors
• Description of User RS232 Interface
• Description of Dataflash Pins
• Target Socket Section
• ISP Programming
• High Voltage Programming
• Parallell High Voltage Programming
• Serial High Voltage Programming
• Jumper Settings
• Target VCC Settings, TVCC
• Analog Reference Voltage, AREF
• Reset Settings, RESET
• Clock Settings, XTAL1 and OSCSEL
• Expansion Connectors
• Prog Ctrl and Prog Data Headers
• Misc